Sistem Manajemen Jembatan

Berkas:Drone view of a bridge during an inspection.jpg

Drone view of a bridge during a visual inspection for structural health assessment.

Sistem Manajemen Jembatan atau Bridge Management System (BMS) adalah sistem yang dikembangkan oleh Direktorat Jenderal Bina Marga pada kurun tahun 1992  untuk  pelaksanaan manajemen jembatan pada jalan nasional dan provinsi. BMS yang pada saat ini perlu dilakukan perbaikan mengingat BMS masih berplatform MS DOS.

Dalam rangka merevitalisasi kembali software BMS sebagai alat bantu dalam proses penyusunan rencana dan pemrograman jembatan sehingga selaras dengan metoda yang digunakan dalam sistem Perencanaan Teknik Preservasi Jembatan maka pada tahun 2011 Direktorat Bina Program akan melaksanakan pekerjaan Modifikasi dan Revitalisasi BMS dengan bantuan jasa konsultan.

Adapun peran sistem-sistem  manajemen jalan dalam proses manajemen jalan dapat dilihat pada bagan alur berikut ini :

Tujuan rencana dan program dalam BMS adalah sebagai berikut :

• Mengidentifikasikasi jembatan-jembatan yang tidak memenuhi standar baik standar kondisi dan lalu lintas.
• Menentukan strategi penanganan jangka panjang yang dapat menghasilkan nilai ekonomi yang terbaik.
• Menjamin semua penanganan dapat terpantau dan database jembatan selalu dalam keadaan mutakhir.

Komponen-komponen yang terdapat dalam Bridge Management System (BMS) :

• Inspeksi jembatan.
• Rencana dan pemograman.
• Perencanaan teknik.
• Pelaksanaan dan pengawasan.
• Manajemen bahan jembatan.

Adapun kegiatan rencana dalam BMS :

• Mengkaji ulang dan menetapkan kerangka kebijakan.
• Memeriksa dan memperbaharui data jembatan.
• Mengimport data jalan yang terakhir (update) dari IRMS.
• Menentukan tahun acuan.
• Menjalankan skrining teknis dan evaluasi ekonomi.

·Menyiapkan program indikatif tahunan dan lima tahunan (termasuk menentukan anggaran).

Kegiatan program dalam BMS adalah sebagai berikut :

·Menyiapkan alternatif penanganan untuk setiap jembatan yang akan diprogramkan.

• Mengevaluasi strategi penanganan.
• Mengkonfirmasikan penangananan untuk setiap jembatan.
• Menetapkan jembatan untuk program akhir.
• Mengalokasikan sumber dana.
• Mengkaji ulang program sesuai dengan ketersediaan dana/keterbatasan anggaran.

Fasilitas-fasilitas yang ada dalam sistem BMS adalah :

• Pencatatan seluruh inventarisasi jembatan.
• Nilai kondisi dan nilai lalu lintas.
• Identifikasi penanganan jembatan.
• Urutan prioritas pekerjaan jembatan.
• Alokasi dana yang optimum.
• Prosedur-prosedur standar untuk pelaksanaan pekerjaan jembatan.

Tujuan spesifik dari pemeriksaan jembatan adalah :

• Memeriksa keamanan jembatan pada saat layan.
• Menjaga terhadap ditutupnya jembatan.
• Mencatat kondisi jembatan pada saat layan.
• Menyediakan data untuk personil:
  • Perencanaan teknis
  • Konstruksi
  • Pemeliharaan

• Pemeriksaan terhadap pengaruh dari beban kendaraan dan jumlah kendaraan.
• Memantau jembatan secara jangka panjang.
• Menyediakan informasi mengenai dasar pembebanan jembatan.

Data yang dikumpulkan pada saat pemeriksaan jembatan adalah :

• ·       Data administrasi jembatan
  • Nama jembatan
  • Cabang dinas
  • Nomor jembatan
  • Tahun pembangunan

• ·       Dimensi jembatan :
  • Panjang total
  • Jumlah bentang

• Jenis konstruksi, kondisi komponen utama setiap bentang jembatan dan elemen jembatan secara individual.
• Data lainnya.

Dalam melakukan input data pada program BMS, input data pemeriksaan jembatan dibagi menjadi  beberapa jenis yaitu :

1.     Pemeriksaan Inventarisasi. Yang dimaksud dengan pemeriksaan ini adalah :

–         Pemeriksaan ini dilakukan pertama kali untuk setiap jembatan, antara lain : data administrasi, data geometri, data material, data kondisi secara umum, data kapasitas lalu lintas, data kapasitas muatan.

–         Pemeriksaan inventarisasi sekali seumur jembatan kecuali ada perubahan konstruksi.

2.     Pemeriksaan Detail :

–    Pemeriksaan detail dilakukan untuk mencatat seluruh elemen jembatan seperti : identifikasi elemen jembatan, tingkat kondisi elemen, pola kerusakan elemen.

–         Tujuan pemeriksaan ini untuk mengetahui kondisi jembatan secara detail dan akan dilakukan minimum sekali dalam lima tahun.

3.     Pemeriksaan Rutin :

–    Pemeriksaan untuk mengetahui ada tidaknya sesuatu yang tidak diharapkan akan terjadi pada jembatan.

–          Pemeriksaan rutin dilaksanakan secara efektif sekali setahun.

4.     Pemeriksaan Khusus apabila diperlukan

Hubungan antara BMS dengan IRMS antara lain  adalah sebagai berikut  :

·       Mengetahui biaya operasi kendaraan setiap jenis kendaraan.

·   Data hasil perhitungan lau lintas harian rata-rata (AADT) pada setiap ruas jalan.

·       Kondisi setiap ruas jalan.

·       Program penanganan jalan setiap ruas jalan :

–          Pemeliharaan rutin

–          Pemeliharaan berkala

–          Peningkatan

Keuntungan adanya Bridge Management System (BMS) :

·       Jumlah jembatan yang ada pada jalan nasional dan jalan propinsi.

·       Informasi mengenai jembatan yang runtuh pada jalan nasional dan provinsi.

·       Ikhtisar kondisi jembatan untuk di suatu provinsi.

·       Jumlah jembatan di suatu provinsi.

·       Informasi mengenai umur jembatan, apakah ada jemabtan yang berusia lebih dari 50 tahun pada suatu ruas jalan.

·       Jumlah jembatan yang lebih sempit dari lebar jalan.

·       Informasi mengenai program penanganan jembatan pada tahun sebelumnya.

·     Informasi mengenai desain semua jembatan yang diprogramkan pada tahun yang akan datang.

Dalam proses pelaksanaan input data BMS, Balai Besar Pelaksanaan Jalan mempunyai tugas dan peranan  antara lain sebagai berikut :

1.Restore hasil backup P2JN ke komputer BMS sesuai provinsi yang bersangkutan.

2.     Restore laporan hasil survey lapangan pemeriksaan jalan dan jembatan.

3.     Melakukan inputing data hasil detail inspeksi tahun ini.

4.     Melakukan backup data.

5.     Menyerahkan hasil backup data ke Direktorat Bina Program (Subdit data dan Informasi).

Foto Dokumentasi Pelaksanaan Survey Jembatan di Lapangan:

History

Since the late 1980s the structural health assessment and monitoring of bridges represented a critical topic in the field of civil infrastructure management. In the 1990s, the Federal Highway Administration (FHWA) of the United States promoted and sponsored PONTIS and BRIDGEIT, two computerized platforms for viaduct inventory and monitoring named BMSs. In the following years, also outside the U.S., the growing need of an organized and digitized road asset management has led responsible national agencies to adopt increasingly complex solutions able to meet their objectives, such as building inventories and inspection databases, planning for maintenance, repair and rehabilitation interventions in a systematic way, optimizing the allocation of financial resources, and increasing the safety of bridge users. Moreover, as of 2020s, the occurrence of some significant bridge collapse events and an increased sensitivity to the environmental impact of large structure management operations has led some national authorities such as France and Italy to the designation of national guidelines with detailed guidance for the development and adoption of multilevel BMS to optimize bridge management.

System components

Researchers in the field of structural engineering have identified 4 main components for the implementation of a functional BMS:

• Data inventory.
• Cost and construction management.
• Structural analysis and assessment.
• Maintenance planning.

Data inventory

Data and information referring to each life cycle step of bridges need to be collected and archived through a flexible approach, making possible to efficiently update and access them. In commonly used BMS, such goal is achieved adopting database solutions that allows the documentation of data in different formats such as texts, images, three-dimensional models and more. Indeed, the inventory usually includes technical drawings of the original project design, written reports from periodical in-situ inspections, numerical observation series of measurements recorded by installed sensors but also geo-referenced data about the structure site as well as 3D scaled model that document the actual state of the bridge.

While the collection of historical documentation and project design of the structure is represented by analogical and digital archives managed by road asset managers, the geometric data input implies the application of topographic techniques through dedicated surveys on the field. In particular, bridge inspections for the 3D reconstruction of a digital twin of the structure usually consists of survey campaigns using global navigation satellite system measurements, ground and drone-based photogrammetry and laser scanning. Data management in this phase implies the use of geographic information systems, BIM and computer-aided design software, manipulating both 2D and 3D geo-referenced data. Resulting products include point clouds and meshes that serves as the basis for building information modeling processes. Bridge surveys can be repeated in different steps of the structure life cycle and their frequency depends on decision making and prioritization of maintenance operation and national guidelines.

In addition to visual geomatic inspections, other nondestructive evaluation techniques are commonly adopted, allowing to collect data not limited to the accurate geometric reconstruction of the structure but also to the material conditions. In this case, the adoption of ground penetrating radar for detection of deterioration of the reinforcement in decks and infrared thermography for identification of delamination and degradation of bridge components is well documented in academic research and considered a complementary step to traditional visual inspection approaches.

Cost and construction management

An accurate implementation of a virtual digital twin or a BIM model of a structure is considered the starting point for budget management and optimization since the early stage studies on BMS. For example, it provides the opportunity to calculate the total cost materials and specialized operator needed in the construction step, quantifying in advance the expenses and consequently adopting better economic strategies. Moreover, a multi-temporal management of information referenced to specific portions of the bridge enables the possibility to define efficient time tables for material delivery planning, project progress monitoring and documentation, construction schedule improvement and workers and experts coordination. In recent BMS applications, sustainability also plays a crucial role in the definition of procedures for cost optimization adopting dedicated approaches such as Life Cycle Assessment, calculation of carbon-footprint and energy consumption along the different phase of the bridge life cycle.

Structural analysis and assessment

Example of FEM analysis on a bridge.

Example of a structural analysis of a bridge in a FEM environment.

Visual inspection often result in large amounts of data stored in the BMS inventory that serve as input for image-based processes for defect and damage detection. While traditional method for simply relied on human evaluation, Computer Vision techniques taking advantage of Artificial Intelligence and Machine Learning semi-automatize the extraction of meaningful information from pictures taken during inspections. For example, recent applications of semantic segmentation allows the identification of elements affected by corrosion or other degradation phenomena, enabling experts to assign a grade of severity for the damage. Additional insights on the structure conditions are given by numerical simulations on fatigue behavior with finite element method modeling. This case is particularly valuable when data from in-depth detailed inspections or load tests are available, providing a rich information inventory also for computing simulations on stress behaviors and mechanics.

At a larger territorial scale, a similar grading approach is also applied to the evaluation of the whole road network context in which the single structure analyzed is located. Such quantitative analysis are usually connected to the evaluation of road surface deformations with InSAR technologies or to calculation and prediction of the average daily traffic flow in GIS environments.

All the results coming from analysis, simulations and severity level classifications serve as input for the execution of the intervention prioritization, the core part of the maintenance planning component in a BMS framework.

Maintenance planning

Bridge deck special inspection

Targeted special inspection of a bridge deck.

The definition of operation schedule and more detailed inspection is a key function in the decision making process of a BMS. Based on quantitative and qualitative data acquired during routine inspections and along the processing of information in the structural analyze phase, BMS users need to identify priority interventions through a dedicated maintenance plan. This goal is achieved with the implementation of platforms and tools that enable stakeholders to explore data, results and observations and link them to detailed fact sheets reporting the health conditions of each structural elements of the bridge.

Prioritization of intervention on single elements or on the whole structure is determined through a multi-criteria approach that consider the risk of defect or collapse. In particular, the process usually implies the computation of indexes for quantifying hazard, vulnerability and value exposure and derives from them a warning class. Warning classes then serve as parameters for prioritizing the allocation of funds and operators for further detailed and more frequent monitoring approaches for structures at risk. As a result, bridges whose structural integrity and serviceability are more affected are classified in higher warning classes, requiring targeted interventions. This operation is essential to determine if special inspections with expert operators and specific tests (e.g. load tests) are required and if any new or additional sensors (e.g. extensometer, accelerometer) for continuous monitoring need to be installed on the structures for targeted monitoring.

National guidelines

In order to assess and quantify the health condition of the bridges located in their national territory, many countries have formulated a series of general indications and guidelines for the implementation of dedicated bridge management systems.

France

In 2019, the French Centre for Studies on Risks, the Environment, Mobility and Urban Planning (CEREMA) in collaboration with the French Institute of Science and Technology for Transport, Development and Networks issued the national guidelines, proposing a multilevel methodology for the assessment and management of the risk of failure due to scour for bridges with foundations in water. The current version of the French guidelines only refers to bridge scour and hydraulic risk.The proposed methodology runs on 4 levels:

1. Summary analysis: qualitative risk analysis on a large scale and classification of the structure into three risk classes: low, medium, and high;
2. Simplified analysis: semi-quantitative analysis on bridges previously classified in the medium and high level of risk;
3. Detailed analysis: in-depth studies on high-risk structures with numerical modeling approaches
4. Risk management: identification of actions to improve the conditions and/or reduce the sensitivity of critical bridges.

Italy

View of the collapsed Morandi Bridge in Genova

Collapsed Morandi Bridge in August 2018 in Genova (Italy).

Ensuring the safety and well-being of these road infrastructures has become an urgent matter in Italy, especially after the evidence of bridge collapses occurred in the last decade. In response to the need for reliable and up-to-date information regarding bridge conditions, in 2020 the Italian Superior Council of Public Works has developed the Guidelines on Risk Classification and Management. These guidelines establish a multi-level approach for documenting bridge characteristics, assessing their health through visual inspection and damage identification, and determining their risk classification based on hazard, exposure and vulnerability derived from the previous steps. Subsequently, depending on the assigned class, the number of investigation levels required to evaluate the structure's safety is determined. Road asset managers are then asked to establish and maintain a management system able to track in time interventions, documenting defects assessed on different portion of the bridge as well as environmental site conditions (hydraulics, geology, seismology). The guidelines identifies six levels:

1. Collection of available data about bridge construction, accessing existing archives;

2. Visual inspection reports about structure geometry and bridge elements conditions;

3. Risk classification of the structure in one of the five attention classes, i.e., low, medium-low, medium, medium-high, and high;

4. Simplified safety assessment for bridges in medium or medium-high attention class;

5. Accurate safety assessment for bridges in the high attention class;

6. Resilience analysis at the network level. (Only drafted in the current version of the guidelines).

Examples

The below are examples of commonly used bridge management software:

• Pontis, now Known as AASHTOWare Bridge Management, a BMS software sponsored by the U.S. Federal Highway Administration for the management of highway networks;
• DANBRO+, computer-based BMS commonly used in Denmark;
• SwissInspect, Swiss digital twin platform specialized in the management of civil infrastructures, mainly bridges;
• INBEE, digital platform and mobile application that implement the Italian guidelines for bridge monitoring.

See also

• Structural health monitoring
• Management system
• Digital twin
• Structural engineering
• Glossary of structural engineering

Further reading

• Hudson, S. W.; Carmichael III, R. F.; Moser, L. O.; Hudson, W. R.; Wilkes, W. J. (December 1987). "BRIDGE MANAGEMENT SYSTEMS". NCHRP Report (dalam bahasa Inggris) (300). Diakses tanggal 2023-07-07 – via US Transportation Research Board. 
• "Linee Guida per la classificazione e gestione del rischio, la valutazione della sicurezza ed il monitoraggio dei ponti esistenti" [Guidelines for risk classification and management, safety assessment and monitoring of existing bridges] (dalam bahasa Italia). Diakses tanggal 2023-07-06. 
• "Analyse de risque des ponts en site affouillable: un guide du Cerema" [Risk analysis of bridges on scourable sites: a Cerema guide]. Cerema, climat et territoires de demain. Aménegement et résilience (dalam bahasa Prancis). 2019-03-28. Diakses tanggal 2023-07-06.